“Process Gas Lubricant”
SYNTHETIC COMPRESSOR OIL (ISO VG 100)
DEscriptION
ANDEROL 555, previously known as, “ANDEROL Process Compressor Lubricant”, is an ISO 100 diester-based synthetic
compressor lubricant specifically designed to provide long-term lubrication in process gas compressors. The product is
approved and listed in UOP’s T-509-02 “Reciprocating Compressor Spec Writer, REV. 1.2”.
APPLICATIONS
Cylinder and crankcase lubrication for reciprocating compressors and vacuum pumps for the following gases:
Air Hydrogen Carbon Dioxide (dry) Natural Gas
Butadiene Methane Ethylene Propane
Carbon Monoxide Nitrogen Helium Synthesis Gas
Furnace (crack) Gas Sulphur Hexafluoride Hydrogen Sulphide (dry)
Nominal Operating Range is –20°C to 230°C
ADVANTAGES
No metallic additives to interfere with catalytic processes
Fewer oil changes
Lower oil consumption
Reduces compressor maintenance
Eliminates lacquering and deposits
Greatly reduces fire and explosion hazard
Reduces energy consumption
Separates water condensate rapidly
APPROVALS and SPECIFICATIONS
ANDEROL 555 is field tested, approved or recommended by major compressor manufacturers.
The product is approved and listed in UOP’s T-509-02 “Reciprocating Compressor Spec Writer, REV. 1.2”.
Anderol Specialty Lubricants
a division of Chemtura Corporation
215 Merry Lane
East Hanover, New Jersey 07936
Technical Service +1.973.887.7410
Customer Service +1.203.573.4595
2 of 2
The information contained herein relates to a specific Chemtura product and its use, and is based on
information available as of the date hereof. Additional information relating to the product can be obtained
from the pertinent Material Safety Data Sheets. Nothing in this Technical Data Sheet constitutes a term or
condition of sale nor shall it take precedence over, supersede or modify or be construed to take precedence
over, supersede or modify, any of Chemtura's standard or other terms and conditions of sale under which
the product is sold by Chemtura. NOTHING IN THIS TECHNICAL DATA SHEET CONSTITUTES, NOR
SHALL IT BE ConSTRUED TO CONSTITUTE, A REPRESENTATION OR WARRANTY, EXPRESS OR
IMPLIED, REGARDING THE PRODUCT'S CHARACTERISTICS, USE, QUALITY, SAFETY,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Nothing contained herein shall
constitute permission or recommendation to practice any intellectual property without the permission of the
owner. This product is sold only under terms and conditions agreed in writing by Chemtura and the
respective buyer and the terms and conditions of such agreements shall in all cases prevail. ANDEROL,
ROYCO, AOSyn and PQ and their corresponding logos are trademarks of Chemtura Corporation or one of
its subsidiaries. Copyrigh (c) 2010 Chemtura Corporation. All rights reserved.
TYPICAL PROPERTIES:
PROPERTIES TEST METHOD ANDEROL 555
Viscosity, cSt
@ 40°C ASTM D 445 92.0
@ 100°C ASTM D 445 8.9
Pour Point, °C ASTM D 97 -37
Flash Point, COC, °C ASTM D 92 259
Specific Gravity, 15.6°C (60°F) ASTM D 4052B 0.96
Copper Strip Corrosion, 3 hrs @ 100°C ASTM D 130 1B
Autoignition Temperature, °C ASTM E 659 410
Evaporation, 22 hrs @ 99°C (210°F), % loss ASTM D 972 <1.0
Conradson Carbon Residue, % ASTM D 189 0.02
Four-Ball Wear, 1200 rpm, 167°F (75°C), 40 kg, 1 hour, mm ASTM D 4172 0.8
Demulsibility @ 54°C, mL oil/water/emulsion (min) ASTM D 1401 41/39/0(25)
责权声明：
①本版块的所有文章及图片均为客户自行编辑，其版权为客户所有，客户需保证其编辑的文章及图片均无侵犯任何第三方的合法权益，如被第三方维权，由客户承担全部责任；
② 本网站仅为展示平台，如要转载，请与我网站联系协助获得授权；
③发布内容如有侵权，请及时联系我网站进行删除。
※ 联系电话：400-854-6788
