AUTO5-1手持式汽车尾气分析仪
简介
·世界上内置电池驱动的手持式汽车尾气监测仪
·为与汽车尾气监测提供了简便、高效和低成本的检测手段
·低功耗红外传感器
·内置充电电池可供连续工作6小时
·反应时间小于12秒
·可存储250组测试结果
·带背光的显示屏可同时显示所有参数
·钳夹式探头可固定在排气管上, 便于行驶中的工况排放检测
·高效、耐用的过滤器
·红外遥控打印方式
·220v交流充电器和12v车载充电器
·体积 220 x 55 x 120mm, 重量1kg
技术参数
测量 | 范围 | 分辨率 | 精度 |
CO | >5% , 过量程20% | 0.01% | 读数的+5%, |
HC | 0 ~ 2,000ppm, 过量程10,000ppm | 1ppm | 读数的+5%, |
O2 | 0 ~ 21%, 过量程0 ~25% | 0.01% | 读数的+5%, |
NO | 0 ~ 5,000ppm | 1ppm | 读数的+5% |
CO2 | 0 ~16%,过量程0 ~20% | 0.01% | 读数的+5%, |
机油温度 | 0 ~150℃ | 1.0℃ | +2℃ |
发动机转速 | 200 ~ 4,000rpm | 1rpm | 50rpm |
计算 | LAMBDA 空/燃 … …等多种参数 | ||
打印 | KMIRP红外遥控打印机 | ||
通讯 | RS232 | ||
分析软件 | PC 图形分析 |
AUTO5-1 automobile exhaust analyzerBrief introductionThe world 's first built-in battery driven vehicle tail gas monitorFor vehicle exhaust gas monitoring and provides a simple, efficient and low cost detection meansLow power infrared sensor.Built in rechargeable batteries for 6 hours of continuous workResponse time of less than 12 seconds.Can store 250 sets of test resultsHaving backlight display can display all parametersJohn clamp type probe can be fixed on the exhaust pipe, convenient in driving mode emission detectionEfficient, durable filterPrint mode, infrared remote control220V and 12V AC charger car charger* Volume 220 x 55 x 120mm, 1kg weightTechnical parametersMeasurement Range Resolution PrecisionCO > 5%,over the range 20% 0.01% Reading + 5%,HC 0 ~ 2000ppm, after 10000ppm range 1ppm Reading + 5%,O2 0 ~ 21%, 0 ~ 25% of excess 0.01% Reading + 5%,NO 0 ~ 5000ppm 1ppm Reading + 5%CO2 0 ~ 16%, 0 ~ 20% of excess 0.01% Reading + 5%,Oil temperature From 0 to 150 DEG C. 1 c + 2 CEngine speed 200 ~ 4000rpm 1rpm 50rpmCalculation LAMBDA air / fuel ... ... A variety of parametersPrint KMIRP infrared remote printerCommunications RS232Analysis software PC graphical analysisApplication of environmental monitoring departmentBecause of the existing equipment of large volume, heavy weight, need external power AC, difficult way random testing, can only be established fixed detection point, lack of randomization and instant.Due to characteristics of the apparatus, the testing personnel can with a vehicle in any place on the road running vehicle for sampling, not affected by the weather and other objective conditions. Testing personnelThe labor intensity can be improved. Exhaust gas purifying device for rapid test of exhaust gas purification device detection must be in working condition, but now the condition testing requiredTo make bench test, test equipment price is around five, six hundred thousand, many hundreds, tens of millions of, a tail gas purifying device for the detection of costs are also high. A lot of production,Research unit did not have the ability to recurrent product test. Because the instrument hand-held portable features, can be used for the actual vehicle road condition detection, simpleConveniently reflect a car in different load, different ways of basic discharge exhaust gas. And spend only a few million yuan equipment disposable investment.Research application of automobile tail gasThe use of AUTO for vehicle test characteristics, researchers can easily get a car in city traffic emission under the basic data, for the government decision-makingAgencies to provide reference information, benefit city road planning, traffic management and government decision-makingApplication of auto repair factoryOperation of the instrument is very simple, repair work need only a few hours of training to master. Equipment complete function not only can be used for gas detection can also be used for automobile burningSystem fault inspection, adjustment for tail gas to provide fast, reliable reference.On the other site instrument calibration reference applicationBecause the instrument light characteristic, managers can carry just in lab calibration apparatus for some good such as annual plant, repair shop, tail gas treatment plant and other unitsIn the equipment running status环境监测部门应用
由于现有仪器体积大、重量沉、需要外接交流电源, 很难做到路上抽查检测,只能设立固定检测点,缺乏随机和即时性。
由于仪器的特点,检测人员可以随车在任何地方对路上行驶车辆进行抽检,不受天气等客观条件的影响。检测人员
的劳动强度也可得到改善。尾气净化装置的快速检验尾气净化装置的检测必须在工况状态下进行,但现在的工况测试需
要进行台架试验,试验设备价格少则五、六十万,多则几百、上千万,做一次尾气净化装置的检测花费也很大。很多生产、
研究单位没有能力经常性对产品进行测试。由于仪器手持式的轻便特点,可用于汽车实际道路行驶状况的检测,简单
方便地反映出汽车在不同负荷、不同道路中的尾气基本排放情况。而花费只是几万元仪器的一次性投资。
汽车尾气的研究工作应用
利用AUTO便于随车测试的特点,研究人员可以方便地得到汽车在城市不同交通状况下的尾气排放的基本数据,为政府决策
机关提供参考信息,利于城市道路规划、交通管理等政府决策
汽车修理厂应用
仪器的操作非常简单,维修工只需要几小时的培训就可掌握。仪器齐全的功能不仅可以用于尾气检测也可用于汽车燃烧
系统故障的检查,为尾气调整提供快速、可靠的参考。
对其他现场仪器的参考校准应用
由于仪器的轻便特点,管理人员可以随身携带刚在实验室内标定好的仪器对一些如年检厂、修理厂、尾气治理厂等单位
进行在用仪器运行状况
责权声明:
①本版块的所有文章及图片均为客户自行编辑,其版权为客户所有,客户需保证其编辑的文章及图片均无侵犯任何第三方的合法权益,如被第三方维权,由客户承担全部责任;
② 本网站仅为展示平台,如要转载,请与我网站联系协助获得授权;
③发布内容如有侵权,请及时联系我网站进行删除。
※ 联系电话:400-854-6788